Tiny Books with Lots of Heart Thursday, Feb 28 $70 Diane Cook 6:30 - 9:30
Student Level: Beginner - Intermediate
Type of Workshop: Project
|
![]() |
These tiny books have blossomed into much more than I could ever have imagined. Let me share their story, as told in the summer 2012 issue of Belle Armoire Jewelry.
I had just attempted to etch a batch of pre-made brass cuffs. Everything seemed fine until my timer went off, and I pulled the first one out of the etching solution. What I found was over-etched metal. Needless to say, I was disappointed, but I quickly took the remaining pieces out of the solution then set them aside, not really knowing what to do with them next. About a week or two later, I decided that I would salvage the “good” from the “over-etched”, and what seemingly looked like a batch of useless metal, became what I call Tiny Books with Lots of Heart.
What happened that day simply emphasizes what I have come to believe, and that is…there are no mistakes in jewelry design, just another creative idea waiting to be born. I think these tiny books are the perfect example of that very belief!
Won’t you join me, as I jump start your creative energy into designing your very own tiny book? Perhaps attach a tiny resin charm that you can make in my Watchfull Resin Charms class, or maybe attach a little nestie or a piece of brass filigree. Whatever you decide, I’m sure it will be filled with lots of heart, just like mine!
Kit fee of $10 payable to Instructor at class time includes:
- Class Handout & Templates
- Vintage Book Paper & Text
- Brass or Nickel Silver, Nuts, Screws & Eyelets
- Sanding Pad, 320 grit
- Synthetic Steel Wool, “000”
- Recycled Sari Silk
Supplies Provided by Instructor for use in class:
- Texturing hammer
- Metal stamps & brass hammer
- Metal chisels
- Patinas
- Micro-torch & Butane
- The Ultimate Glue
- Flat Toothpicks
- Cotton Pads/Swabs
- Clear Finish Matte Spray & Renaissance Wax
- Distress Ink
- Fat Daddy or Heavy Duty Cutter (if needed to cut off pin back of a vintage bauble)
- Satin Varnish
Students should bring:
- Brass, Nickel Silver or Copper Sheet Metal, at least 2”x2” (I will have some etched metal in class for sale or bring your own)
- Bench Block, Steel
- Bench Pad or Rubber Bench Block
- Center Punch, 5/32” or 1/8” (not automatic)
- Cutter, Flush
- Drill Bit, 1/8”
- Flat Jewelry File, #2
- French Shears
- Hammer, Ball Peen
- Mallet, Rubber
- Metal Hole Punch Pliers, 1.8mm
- Metal Awl or Scribe
- Metal Ruler, Small
- Permanent Marker, Ultra-thin
- Pliers, Bailing, Chain-Nose, Flat-Nose & Round-Nose
- Scissors
- Tweezers
- Wire, Bronze (or your choice) 20-22 gauge, 2-4’
Optional:
- Brass Components (hearts, charms, rosary, etc.)
- Chain, (for necklace and/or additional dangles)
- Clasp
- Crystal Rondells
- Rosary Chain, Vintage
- Swarovski Crystal Faceted Drops
- Vintage Dangles or Rhinestone Buttons
- Vintage Lace and/or Ribbon
- Pearls, 6mm (for eggs if you make a nestie)
- Ott Light
Resource Guide:
- www.brassbouquet.com
- www.beaducation.com
- www.riogrande.com
- www.fundametals.net
Questions? Email Diane at rosajosies@yahoo.com
Website: rosajosies.com


