Skulls Wings and Rusty Things Monday 9:00 - 4:30 $130  
  Richard Salley    


Student Level: All
Type of Workshop: Project

 

    The focus of this project class will be on jewelry fabrication techniques that will transfer to projects of your own. The techniques covered will include riveting, prong fasteners, staples, sawing, shaping, wire hardening, chain making and clasp construction, soldering, metal etching, distressing and patination. You will use these techniques to complete a pendant similar to those shown in the sample photos. You will be encouraged to add your touches and embellishments to make the piece truly your own.

    Materials fee of $10 payable to Instructor at class time includes: Nickel silver, etching solution, patina, Faux Bone ™ and the skulls & wings

    Supply and Tool List:
  • 1 or more Small Tin Jar/Bottle lid…like from a Snapple Bottle, etc approx. 2 inches in diameter. Crush the lid, burn it with a torch and let it rust…or otherwise alter it to make it just a little grungy.
  • Flat and round nose pliers
  • Metal shears or tin snips
  • Wire cutters (inexpensive hardware store variety are fine)
  • Files, fine sandpaper, sanding block or Scotch-brite type pad for cleaning and polishing Faux Bone™
  • Bench Pin
  • Bench Block
  • Jeweler’s saw and blades (sizes #00 and #1)
  • Small hammer for riveting (I like the small ball pein hammers…see contenti .com) http://www.contenti.com/products/hammers/260-702.html

Optional: I will have some of these to share, but bring your own if you have them Dremel Tool or similar rotary tool for drilling and #56 drill bit or 1/16 inch drill bit
Hole Punch
Pliers (1.25mm) available at http://www.fusionbeads.com/shop/product/31924/
Center Punch
Soldering Iron

Resources: supplies and tools can be found at the following
www.monsterslayer.com
www.riogrande.com
www.sfjssantafe.com
www.contenti.com
www.harborfreight.com
www.fauxbone.com

Questions? Email Richard at art@rsalley.com
Website: http://rsalley.com